JEDYNKA® NEOKOR® is anti-corrosive primer paint based on styrene alkyd resin with addition of antirust and auxiliary agents. In addition with finish enamel it creates good protection of metal from corrosion cause by unfavourable impact of atmospheric conditions.
- Great protection against corrosion
- Very good adhesion to the surface
- Durability to atmospheric conditions
Area of use
1,0 L, 10,0 L, 5,0 L
10 - 11 m²/l
Work should be perform in temperatures from +5°C to +30°C temperature of the air and relative humidity of the air below 80%
Drying time at + 23 ° C and 50% relative air humidity
Stick free after 5(h). Paintable after 5(h).
Preparation of surfaces
Before application of JEDYNKA® NEOKOR® steel and iron surfaces should be thoroughly clean from rust through sanding or grinding till clean degree at least Sa 2 according to ISO 8501-1. Surfaces destined for painting should be dry, clean, dusted and degrease for example: with extraction naphtha. In case of renovation of previously painted surfaces before priming remove any loose elements of old paint and other contamination which may reduce the adhesion of finish paint, after that the surface should be dusted and degrease.
Stir well prior to use. Depend on degree of rust threat and required time of protection of the surface apply 1 – 2 coats of JEDYNKA® NEOKOR®. Second coat can be applied in “wet – on wet” technique or after drying the first coat. Drying time in normal weather conditions (temp. +20±2°C and relative humidity of air 55 ± 5%) is 3 – 5 hrs. Drying time must be suitable longer in lower temperature and in larger relative humidity of the air. Notice! Priming should be perform in temperatures from +5°C to +30°C temperature of the air and relative humidity of the air below 80%. The temperature of the air should be at least 3°C higher then temperature of the dew point.