Natural primer for wood base on concentrated linseed oil. Product has very deep penetration into the wood and resistance to atmospheric conditions.
- Protection from cracking and drying of wood
- Deep wood penetration
- Resistance to atmospheric conditions
Area of use
1,0 L, 5,0 L
7 - 10 m²/l
airless spraying, brush
Product should be applied at the temperature from +5°C to +30°C. When relative humidity of the air is above 80% the drying time of the surface can be longer.
Drying time at + 23 ° C and 50% relative air humidity
Stick free after 24(h). Paintable after 24(h).
Preparation of surfaces
Wooden surfaces and plaster should be dry, clean and without loose materials.
For painting of wood Linseed oil should be thinned in ratio 1:1 with ROZCIEŃCZALNIK NISKOAROMATYCZNY DO WYROBÓW FTALOWYCH I ALKIDOWYCH. For priming of the plaster POKOST LNIANY (Linseed Oil) don’t have to be thinned. Apply on wood (depend on type) till it will stop absorbing it, at the same time don’t make a varnish surface on the wood. Very good effect gives application of warmed up linseed oil in water bath up to temperature approx.: +50°C+60°C. Higher temperature of linseed oil increase penetration of product and increase drying time. Surfaces primed with lenseed oil can be painted after 24 h with following alkyd enamels: JEDYNKA DO DREWNA I METALU POŁYSK/MAT, JEDYNKA EMAFTAL® POŁYSK. Notice! Painting should be performed at the temperature from +5°C to +30°C. When relative humidity of the air is above 80% the drying time of the surface can be longer.