Drewno i Metal Połysk

Drewno i Metal Połysk

Drewno i Metal Połysk

Low aromatic alkyd enamel for general use. It creates smooth, glossy surfaces with high decorative effect. Thanks to modern recipe painted surface is resistant to mechanical damage. Enamel is resistant to atmospheric conditions. It has very good adhesion to the surface. Enamel does not contain harmful for health chromium and lead compound.

  • Durable colours and high hiding power
  • Durable to mechanical and atmospheric conditions
  • Great coverage - approx.: 14 m²/l per coat
Calculate quantity

Area of use

Can sizes

1,0 L, 10,0 L, 2,5 L, 5,0 L

Consumption

9.8 - 14 m²/l

Gloss

High gloss

Tool

airless spraying, brush, roller

Painting temperature

The surface to be painted should be dry, clean from dirt, dust and other contamination. Enamel should be apply on the surface which were primed.

Drying time at + 23 ° C and 50% relative air humidity

Stick free after 24(h). Paintable after 24(h).

Binder

Preparation of surfaces

The surface to be painted should be dry, clean from dirt, dust and other contamination. Enamel should be apply on the surface which were primed with: • metal – anti corrosion primer paint JEDYNKA ANTYKOROZYJNA (for interior and exterior) or NEOKOR® (only for exterior); • wood and wooden like – with product JEDYNKA POKOST LNIANY (linseed oil), diluted in ratio 1:1 with JEDYNKA ROZCIEŃCZALNIK NISKOAROMATYCZNY DO WYROBÓW FTALOWYCH I ALKIDOWYCH. • Exterior plasters (sockels, facade elements) – with product JEDYNKA POKOST LNIANY (linseed oil). In case of renovation of previously painted surfaces before application of enamel remove any loose elements of old paint and the surface should be cleaned, sanded and degrease e.g. with extraction naphtha. It is recommended to make a test painting. The positive effect decide on final use of product.

Paint

Stir well prior to use. Apply 1-2 thin coats in 24 hour breaks. The paint is dry after 24 hours in normal atmospheric conditions (temp. +20±2°C and relative humidity of the air 55%±5% ). Given break is getting properly longer in lower temperatures and in higher relative air humidity . Enamel can’t be used in temperature of the air and surface lower than +5°C and relative humidity of the air above 80%.

No datasheets available
en
has been added to saved.
has been removed from saved.
has been added to your shopping list.
has been removed from your shopping list.
You have to choose a size.
You have to choose a amount.
You have to choose a color