Śnieżnobiała
Modern emulsion paint which creates matt surfaces with long lasting decorative effect. Unique recipe ensure final effect in the form of pure white coated walls, which doesn’t crack in time thanks to micro-porous texture which allows "breathing" of the walls.
- Good hiding power
- Fast drying time and easy application
- Dry cleaning resistance
Area of use
Interior
Can sizes
1,0 L, 3,0 L, 5,0 L, 10,0 L, 11 L, 15,0 L, 20,0 L
Consumption
7 - 12 m²/l
Gloss
Full matt
Tool
brush, roller, airless spraying
Painting temperature
Painted surface must be dry. Product should be applied at the temperature +5°C to +25°C and relative air humidity 45-75%.
Drying time at + 23 ° C and 50% relative air humidity
Stick free after 2(h). Paintable after 4(h).
Binder
Polyvinyl acetate (PVA)
Preparation of surfaces
New surfaces: should be dry, clean and degreased. New plaster and concrete substrates can be painted after 3-4 weeks of seasoning. Previously painted surface: should be thoroughly cleaned of any flaking paint, dust, grease and other dirt. Surfaces should be dusted and washed with water prior to painting. Layers of glue paint have to be removed completely to uncover plaster. Chalked surfaces must be dusted and washed with water. Walls previously painted with emulsion paint should be thoroughly washed with solution of water and detergent and rinsed with clean water. Primer new plasters and substrates that strongly absorb water (gypsum plasters, plasterboards, never painted substrates) with a suitable deep penetration primer. Paint can be used as primer under next layers of paint Jedynka Śnieżnobiała. In that case dilute paint max. up to 10% with water, depending on the type of surface and application method.
Paint
Before application paint should be well stirred. Product does not require thinning. It is recommended to apply 2-3 coats to achieve required parameters of the paint. The paint is dry after approx. 2 hours. Next coats can be applied not earlier than after 4 hours. Painting should be performed at the temperature from +5°C to +25°C and air humidity 45-47% Notice! In order to avoid differences and archive uniform result it is necessary to make application in one working cycle and use products from same production batch. Any corrections should be made using the "wet on wet" method.